Artnet Pixel mapping

View previous topic View next topic Go down

Artnet Pixel mapping

Post  jeremy012 on Thu May 21, 2015 5:27 pm

Hello,

I have a problem, I have setting up Elidy controlled by Ai using a modular Led fixture, and mapped it on Output page (very easy with v8, thanks), it work very good with moving media, but if I use fixed images the Ai stop sending Artnet packets and Elidy go to black after 10 seconds...

You should improve this by resending packet every 4 seconds, like it write in Artnet protocol documentation:
Art-Net 3 Ethernet Communication Standard wrote:...an input that is active but not changing, will re-transmit the last valid ArtDmx packet at approximately 4-second intervals.

Thanks in advance.

jeremy012

Posts : 18
Join date : 2013-10-11

View user profile

Back to top Go down

Re: Artnet Pixel mapping

Post  ArranAI on Fri May 22, 2015 6:48 am

have you turned on continuous output?

open the artnet/ citp module in the system settings and turn it on and also turn it on for each mixer you wish to be always sending - stagepatch/mixer/artnet device/continuous output

avatar
ArranAI
Admin

Posts : 318
Join date : 2012-11-15
Age : 41
Location : London

View user profile http://www.avolitesmedia.com

Back to top Go down

Re: Artnet Pixel mapping

Post  jeremy012 on Fri May 22, 2015 5:46 pm

It work fine now, thanks!



jeremy012

Posts : 18
Join date : 2013-10-11

View user profile

Back to top Go down

Re: Artnet Pixel mapping

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum